PCB Carolina 2023 Tech Session Downloads

---

Scroll down to see the list of available downloads.

3A) Safeguard your Connected Device - The secrets of Ironclad IoT Security
Cameron Haegle - OEM Field Application Engineer, Digi International

3B) Certification of Electrical Medical Devices
William (Bill) Bisenius - Director of Technical Sales, CertifiGroup

3C) CBRS - How shared spectrum enables Private LTE/5G Networks
Lino Osegueda - VP of Sales, North America, Multi-Tech Systems, Inc.

3D) EMC, SI, and PI Impact of Embedded Capacitance and High-Performance Copper in RF and High Speed Digital Devices
​Bob Carter - VP of Business Development and Technology, Oak-Mitsui Technologies

4A) Using simulation to reduce PCB field failures
Harry A. Kennedy - Electronic System Design Technical Specialist, Altair

4B) PCB Design for High Reliability, Part 1
Paul Cooke - Senior Director of Business Development, Ventec International Group

4C) PCB Design for High Reliability, Part 2
Paul Cooke - Senior Director of Business Development, Ventec International Group

4D) PCB 3.0, Looking at Design Differently
Patrick Davis - Product Management Director, Cadence Design Systems

5A) Test Fixture / RF Enclosure Combinations: Mechanical Design, Characterization and Innovations

Matthias Zapatka - Field Applications Engineer, INGUN USA

5B) Design considerations for use of mechanical switches and interconnects for high vibration applications
Bob Hayes - Technical Sales Manager, Deca Switch-Lab/DSI America

5C) Optimizing Parasitic Capacitance in Power Substrates to Lower Common Mode Interference
Prof. Douglas Hopkins -Professor, NC State University

5D) LoRaWAN 101 - A Technical Introduction

Lino Osegueda - Director of Sales, Multi-Tech Systems

6A) Life in the Fast Lane – Signal Integrity Basics for Embedded Applications

Matthew Burns, Global Director – Technical Marketing, Samtec

6B) Hum Me A Few Bars, But Not at 60 Hz - Low Frequency Signal Integrity with Hardware Demonstrations, Part 1
Lee Hill- Founding Partner, SILENT Solutions LLC

6C) Hum Me A Few Bars, But Not at 60 Hz - Low Frequency Signal Integrity with Hardware Demonstrations, Part 2
Lee Hill- Founding Partner, SILENT Solutions LLC

6D) PCB 101 - How Boards are Manufactured
Nino Hardin - Dir of Sales, Summit Interconnect

Laura Martin - Dir of Technology, Insulectro